top of page

Fire Fighting System

ASM 1200

1200 Liters/min. Water Monitor

water monitor
atilim catalogue

It is used as a fire extinguishing equipment and allows the water to be easily directed to the desired area from a distance.
 

  • The monitor offers 1200 lt/min at 10 Kg/cm2 pressure. It is capacitive and it moves 360 degree hor and +90 o, -80 o vertical.

  • The barrel is designed to dispense water. The barrel can be changed and replaced with foam.

  • The barrel material is made of light-metal alloy corrosion-resistant aluminum.

  • Su Monitor body joints are bedded with bearings. The surfaces of the sealing felts are covered with hard chrome. NBR nutring and o-ring are used as the sealing element.

  • It is controlled by the valve connected to the monitor input.The movement of the monitor is provided manually. Position lock is available.

1200-liter-water-monitor
  • Max. Working Pressure: 16 Bar

  • Min. Working Pressure: 5 Bar

  • Test Pressure: 24 Bar

  • Inside Diameter of Water Way: 60 mm

  • Max. Flow: 1200 lt/min. (under 10 bar pressure)

  • Connection Flange: DN65 ND 16

  • Output Connection: 2 1⁄2’’ Male Threaded

  • Horizontal Movement: 360°

  • Vertical Movement: +90° - 80°

  • Weight: 34 Kg

AKSM 1200

1200 Liters/min. Water And Foam Monitor

This is used as a fire extinguishing equipment and ensures easy direction of water and foam to the desired area from a distance. Barrelof the water monitor is replaced to shot foam. Foam rate is adjustable with a ball valve.

water monitor
  • Max. Working Pressure: 16 Bar

  • Min. Working Pressure: 5 Bar

  • Test Pressure: 24 Bar

  • Inside Diameter of Water Way: 60 mm

  • Max. Flow: 1200 lt/min. (under 10 bar pressure)

  • Connection Flange: DN65 ND 16

  • Output Connection: 2 1⁄2’’ Male Threaded

  • Horizontal Movement: 360°

  • Vertical Movement: +90° - 80°

  • Weight: 34 Kg

1200-lt-water-and-foam-monitor

2700 Liters/min. Water And Foam Monitor

AKSM 2700

2700-lt-water-and-foam
  • Monitor has a capacity of 2700 liters/min. at 7 kg/cm pressure and rotates 360 degrees horizontally and 65 degrees vertically.

  • Monitor has two barrels to shoot foam and water.

  • Barrel is made from corrosion resistant aluminum-light metal alloy.

  • Monitor body is made from bronze.

  • Valves are 3” butterfly valves and both can be monitored simultaneously with a single arm.

  • Monitor is inter transformable from foam to water and from water to foam without turning off water jet action and is manually operated.

  • Pressure gauge with (0-16 kg/cm ) range is installed at the body outlet.

  • Body adjustment valve is 1 1⁄2” ball valve, foam-water proportioning valve can maintain 1-7% proportioning.

  • Monitor’s water foam valves are operated with the same arm.

  • Up-down and horizontal movements are achieved with the help of bronze gears working with manual gear disks.

  • Monitor’s inlet collector 4”

  • Body of 4”inlet collectors are made from aluminum, check valves can be dismantled for replacement.

  • Body wall thickness is 8-10 mm. Monitor body weight is 150 kg.

water monitor
  • Max. Working Pressure: 16 Bar

  • Min. Working Pressure: 5 Bar

  • Test Pressure: 24 Bar

  • Inside Diameter of Water Way: 60 mm

  • Max. Flow: 1200 lt/min. (under 10 bar pressure)

  • Connection Flange: DN65 ND 16

  • Output Connection: 2 1⁄2’’ Male Threaded

  • Horizontal Movement: 360°

  • Vertical Movement: +90° - 80°

  • Weight: 150 Kg

Fire Fighting Water Pump

  • Water Pumps Sizes are selected to suit the size of the filling building and the number of tanks and driven electric or diesel engine.

  • All interior bolt and screw exposed to pumped liquid shall be made of rolled bronze or corrosion resistant material.

  • The pump shall be provided with automatic air-release valve, circulation relief valve and pressure gauges.

  • Bearings shall have an L-10 rating of not less than 5000 hours at maximum load.

  • The pumps shall be provided with at least four packing rings plus a lantern ring. The lantern ring may be permitted to replace one ring of packing.

  • Impellers, wear rings, shafts, lantern rings, glands shall be made of corrosion resistant material.

water monitor
  • Capacity: 200-250-300-400-450-500 GPM

  • Head: up to 150 PSI

  • Speed: up to 3000 rpm

  • Casing Pressure (Pmax): 16 bar

water monitor

Water Spring

AWS 1000

water spring
water spring
water spring

It is made of brass material. It allows water to spread in the shape of an umbrella. At an 8 bar pressure, it generates 15 liters per minute.

AWS 2000

Fire Hose Cabinets

 Fire Hose Cabinets
 Fire Hose Cabinets
 Fire Hose Cabinets

It is made of brass material. It allows water to spread in the shape of an umbrella. At an 8 bar pressure, it generates 15 liters per minute.

​

  • Fire fighting hose: 2” (size 85 – 52mm) originaly imported, rubber inside, circular woven synthetic yarn outside red colored, endures 50 bar pressure, in rolls of 20m.

  • Hose nozzle: Size 85 (52mm) German type, aluminum injection Monitored nozzle: Size 85 (52mm) German type, aluminum

  • injection, on-off, jet-spraying.

  • 2” (size 85): Brass valve and German type aluminum injection bushing

  • Outdoor fire cabinet: 70x70x20cm dimensions, 1,5 mm sheet thickness, outdoor type, with roof, with legs, includes reel for 1 unit 2” fire fighting hose, complete and ready to install

bottom of page